Browsing PRISM: Polymer, Recycling, Industrial, Sustainability and Manufacturing Institute (Midlands) by Title
Now showing items 1-20 of 241
-
3D printed end of arm tooling (EOAT) for robotic automation.
(MDPI, 2018-09)This research furthers the practice of designing and manufacturing End of Arm Tooling (EOAT) by utilizing a low cost additive manufacturing Fused Filament Fabrication (FFF) technique to enable tool weight saving and ... -
3D printed end of arm tooling (EOAT) of a robotic arm
(Athlone Institute of Technology, 2018-04-24)This research furthers the practice of designing and manufacturing an EOAT for low weight applications by utilising additive manufacturing (“3D Printing”) techniques to decrease energy consumption via tool weight savings ... -
3D printed polymers are less stable than injection moulded counterparts when exposed to terminal sterilization processes using novel vaporized hydrogen peroxide and electron beam processes.
(Elsevier, 2019-11-21)There is an increasing trend for use of 3D printing processes in healthcare due in part to emergence of customised medical devices and associated low manufacturing cost. However, there is a dearth of knowledge on the ... -
3D printing of photocurable resin reinforced by functionalised graphene nanoplatelets
(MDPI, 2023-05-05)The influence of functionalised graphene nanoplatelets with melamine on the thermal and mechanical properties of a 3D-printed photopolymerisable resin is investigated. In this work, a liquid-based 3D printer and stereolithography ... -
Additive manufacturing of personalized pharmaceutical dosage forms via stereolithography.
(MDPI, 2019-12-03)The introduction of three-dimensional printing (3DP) has created exciting possibilities for the fabrication of dosage forms, paving the way for personalized medicine. In this study, oral dosage forms of two drug ... -
Additive manufacturing of PLA/HNT nanocomposites for biomedical applications
(Elsevier, 2019)Additive manufacturing has been of great interest of research in various applications due to their ease in processability, cost effectiveness and adaptability. In this study Poly Lactic Acid (PLA) was used as the base ... -
Alfa fiber/polypropylene composites: Influence of fiber extraction method and chemical treatments.
(Wiley, 2019-01)Alfa fiber/polypropylene composites were manufactured using twin-screw extrusion. Fibers were extracted following alkaline and steam explosion methods. Three chemical treatments were also applied to alkaline extracted ... -
Analysis of the mechanical properties of solvent cast blends of PLA/PCL.
(Trans Tech Publications, 2014-09)Polylactic acid (PLA) is the most promising material in the biodegradable category. However, brittleness and poor thermal stability restrict its application. To overcome this limitation, PLA may be blended with other ... -
Antimicrobial active bioplastics using triangular silver nano-plate integrated polycaprolactone and polylactic acid films
(MDPI, 2021-02-28)An innovative antimicrobial technology for plastic surfaces is presented. We report the synthesis and scale-up of triangular silver nano-plates (TSNPs) and their integration into polycaprolactone (PCL) and polylactic ... -
Antimicrobial films containing green synthesised zinc oxide nanoparticles for biomedical applications
(Athlone Institute of Technology, 2020-06)Synthetic biomaterials have been vastly investigated for different biomedical applications such as wound healing adhesives, implant devices and drug delivery systems. The effort on this field of study promoted the ... -
Antimicrobial PAA/PAH electrospun fiber containing green synthesized zinc oxide nanoparticles for wound healing
(MDPI, 2021-05-27)Wound infections are the main complication when treating skin wounds. This work reports a novel antimicrobial material using green synthesized zinc oxide nanoparticles (ZnONPs) incorporated in polymeric fibers for wound ... -
Application of biomaterials for complex anal fistulae
(Taylor & Francis, 2021-11-07)Complex anal fistulae remain a challenge for the medical sector as conventional treatments put patients at risk of incontinence. Clinicians and researchers have become interested in the application of bioresorbable ... -
Application of immersive technologies for education: state of the art.
(IEEE, 2015-11)Existing multimedia systems used in education mostly address only two senses by using two communication channels (visual and audio) of the five human senses (sight, hearing, taste, smell, and touch), limiting the potential ... -
Applications of Digital Twin across industries: a review
(MDPI, 2022-06-14)One of the most promising technologies that is driving digitalization in several industries is Digital Twin (DT). DT refers to the digital replica or model of any physical object (physical twin). What differentiates DT ... -
A bilayer vaginal tablet for the localized delivery of disulfiram and 5-fluorouracil to the cervix
(MDPI, 2020-12-06)This study was performed to develop an adjuvant therapy in the form of a self-administered vaginal tablet regimen for the localized delivery of chemotherapeutic drugs. This therapy will help to reduce relapse by eradicating ... -
Bioactive composites fabricated by freezing-thawing method for bone regeneration applications.
(Wiley, 2016-04)Hydrogels are widely used for controlled delivery of therapeutic agents. However, hydrogels lack bioactivity to encourage bone formation and mechanical integrity. Moreover, chemically crosslinked hydrogels exhibit cytotoxic ... -
Biodegradable medical implants
(De Gruyter, 2019) -
Biodegradation and antimicrobial properties of zinc oxide-polymer composite materials for urinary stent applications
(MDPI, 2020-10-20)Research advancements in the field of urinary stents have mainly been in the selection of materials and coatings to address commonly faced problems of encrustation and bacterial adhesion. In this study, polylactic acid ... -
Bioresorbable chitosan-based bone regeneration scaffold using various bioceramics and the alteration of photoinitiator concentration in an extended UV photocrosslinking reaction in an extended UV photocrosslinking reaction
(MDPI, 2022-10-28)Bone tissue engineering (BTE) is an ongoing field of research based on clinical needs to treat delayed and non-union long bone fractures. An ideal tissue engineering scaffold should have a biodegradability property ... -
Bone tissue engineering scaffold optimisation through modification of Chitosan/ceramic composition
(MDPI, 2023-06-01)A large bone defect is defined as a defect that exceeds the regenerative capacity of the bone. Nowadays, autologous bone grafting is still the gold standard treatment. In this study, a hybrid bone tissue engineering scaffold ...
